For the woodworking industry, many users wear-resisting Peristaltic pump pipe Not unfamiliar, this is an industrial dust collector used on woodworking carving machines, mainly used to absorb wood chips, wood ash, etc. At present, there are many kinds of woodworking vacuum tubes on the market. In the past few years, major furniture factories used PVC steel wire hoses with flat ends. In recent years, more and more enterprises have replaced cheap PVC steel wire hoses with more wear-resistant and durable pu steel wire expansion tubes. Some of the former take a few days or a month, while some of the latter take a few months or a year, They are also steel wire hoses. Why is the service life gap so far? First of all, you may have the impression that many PVC hoses have a very bad smell. This kind of hose is often used in daily life. Because the raw material itself is very cheap, the price of the finished product is also very low. For example, only a dozen yuan a piece. Think about the price of PVC raw materials, which is generally 8-15 yuan a kilogram, And most businesses will not use expensive PVC raw materials, Peristaltic pump pipe Where can I find it? The woodworking vacuum tube produced in this way has a very strong smell, not only unpleasant, but also many times the product can not even achieve environmental protection. However, the current updated product, pu steel wire telescopic tube, is a large woodworking furniture factory. An expensive woodworking carving machine uses a cheap vacuum tube with a very smelly smell, which has much to do with the overall style.

Xiamen Peristaltic pump pipe Air conditioning and ventilation engineering equipment applicable to industry and various buildings, widely used in food processing, machinery production, pharmaceutical products, electronic industry, cotton textile, sports entertainment and cultural places, hotels, hotels, office buildings, small villas, etc. Stainless steel air ducts are widely used in air conditioning and ventilation systems. The product covers almost all industries and has a very high penetration rate. After years of continuous development, this technology has achieved a qualitative leap in the industry. The overall structure of stainless steel welded air duct products is combined, which can flexibly form any direction. Each part of the chimney is basically assembled into a separate part by the inner pipe, outer pipe, ring plate, support, insulation materials, etc. The connection between sections shall be sealed with special materials and accurately combined with the hoop. The corner and steering parts are clamped by elbows, tees, etc. The displacement caused by temperature difference is fully compensated by expansion joints and compensators. The explosion-proof door is installed at the boiler outlet or local horizontal flue. When multiple boilers share a chimney, the steering valve plate can be used for effective control. Stainless steel welded air duct is very common in our life. According to different uses, shapes and processing technologies, pipes can be divided into several types. Depending on the use and location, Peristaltic pump pipe Where can I find it? It can be divided into purification system air supply, industrial air supply and exhaust, environmental protection system air supply and exhaust, air conditioning and ventilation, etc. For process workers, it is divided into angle iron air duct and flange air duct. With the continuous development of economy, the use range of ventilation equipment is also expanding, and the role of equipment cannot be ignored. With the progress of science and technology, the technical level of all walks of life is also constantly improving. Ventilation equipment is no exception, and the equipment is becoming more and more perfect.

As the use time increases, wear-resisting Peristaltic pump pipe A large amount of impurities will accumulate in the pipeline. These impurities stored in the pipeline for a long time will accelerate the condensation of oil, form pneumatic valves, damage hydraulic components, and have a great impact on normal operation. Therefore, it is very important to clean the stainless steel welded air duct regularly. How to clean impurities in stainless steel welded air duct? When the stainless steel welded air duct is connected with the fan, the inlet and outlet shall be provided with flexible joints. The size of flexible joint shall be the same as the inlet and outlet of fan. Hose joints are usually made of canvas, artificial leather and other materials. The hose length shall not be less than 200. Sealing shall be proper. Hoses dampen fan vibration. Before the welding air duct is connected with the dust removal equipment and heating equipment, and after the completion of the equipment, the prefabrication and equipment shall be stopped according to the theoretical mapping. During equipment installation, the inlet and outlet of stainless steel welded air duct shall be opened during prefabrication. If an air outlet is required at the end of the pipe, the connection shall be closed. When transporting natural gas containing condensate or water, the horizontal pipeline shall be inclined, and the drainage pipe shall be connected at the low point. Longitudinal joints do not apply to the bottom of the pipe. Sealing treatment shall be stopped for the bottom joint. For steel plate air ducts conveying flammable and explosive gases, cross connectors shall be installed at the connecting flanges of the air ducts and connected to the electrostatic grounding grid. When the height of the horizontal airway is more than 4m, the installation personnel shall fasten the safety belt. Peristaltic pump pipe Where can I find it? The springboard on the scaffold or movable support shall be fixed. The width of the springboard shall meet the safety specifications. The installation personnel on the scaffold shall carry bags with them to prevent falling objects or electric drills from hurting people. After installing double hangers on the welded air duct, the cross arm shall be straight and the suspender shall not be replaced.

How to install correctly Xiamen Peristaltic pump pipe ？ In the fire smoke exhaust pipe system, the airport and air valve must use non fuel, and the thickness of citizen flue and galvanized ventilation pipe should be improperly used. The high-pressure system should be selected according to the national code GB50243. When the fire smoke exhaust fan is installed on the roof, certain maintenance measures should be taken. The exposed power line must be threaded through the conduit, and the conduit material should be combined with the metal hose or Capelli and duck neck equipment to make it curved. The fire fighting system and equipment lines must be fixed with special clamps to avoid falling. Stainless steel air duct and ventilation equipment shall be made of three fabric flame retardant materials with soft connection. It is suggested that the length should be 15-30cm, and the electrical interpenetration should be completed. Bolts require the same length. The three main bodies should be grounded, ventilation equipment, and equipment and devices between dynamic loads should be equipped with shock absorption measures. When Peristaltic pump pipe Where can I find it? Box type pipe fittings should not be used for changing direction, variable diameter, branch road, or junction, but the wind speed of box section should not exceed 1.5m/s for air distribution and static pressure box when necessary; It is advisable to have 5-10 times the pipe diameter between conduit pipes. The length of expandable metal pipes or non-metallic soft links should not exceed 2 meters. There should be no disintegration and dead corners. During the installation process, when the length of pipe elbows and straight pipes exceeds 20 meters, add anti impact frame open room exhaust fans and add or subtract supports.