Once the inner rubber layer is worn out, the raised layer will be exposed, Sandblasting pipe Will crack. The lifting layer is the compressive layer of the sandblasting plastic hose. The raw material and structure of the raised layer immediately determine the compressive level of the sandblasting plastic hose. Generally, there are two kinds of raising layers: cloth clamping raising layer and coiling raising layer. Most of the sandblasting plastic hoses with an inner diameter of 50 mm or more are used in the construction site where the sandblasting pipe must be connected, so as to reduce the working pressure damage in the sandblasting plastic hose and ensure the normal operation of the construction of the shot blasting removal project.

Specifications, models and standards of sandblasting pipes: specifications and models refer to the inner diameter of sandblasting plastic hoses. Common specifications and models of sandblasting plastic hoses include 20mm, 25mm and 32mm. The proper use of sand blasting plastic hoses is based on the diameter of the nozzle.

Carbon black is added to the inner rubber layer of sandblasting plastic hoses supplied in the domestic market, which can eliminate static electricity and can be used safely. Sandblasting Plastic hose It is composed of an inner glue layer, a raising layer and an outer glue layer, and each layer is connected with an adhesive in the middle. The inner rubber layer immediately touches the air compression and wear-resistant materials, and the wear-resistant performance is very high.