in the light of Sandblasting pipe Customers who have a certain use of the products will have a certain grasp. For some reasons, it is inevitable that many problems will arise in the whole process of their application, which will cause certain harm to everyone's work. Just as the application of sandblasting pipes must deal with the uneven thickness of the adhesive, what countermeasures can be taken to deal with this matter?

The internal structure of the sandblasting pipe is composed of an internal rubber layer, a single-sided or double-layer cloth clamping coiled layer and an external rubber layer. Its key feature is that the rubber hose has the advantages of small diameter tolerance, acid and alkali resistance, high temperature resistance, high quality, lightweight, soft, firm and durable pipe body. The engineering blasting working pressure of the rubber hose is four times of the pressure.

In order to better assist many customers in their application, the technical professional staff's countermeasures against their problems are summarized as follows:

1. Strictly control the extrusion process standard of the inner layer glue of the sandblasting pipe, and adjust the nozzle type of the extrusion machine.

2. Properly control the fan volume. It is not necessary to remove the air halfway, but gradually reduce the air intake and exhaust volume with the mandrel continuously embedded in the finishing tube.

3. Straighten the mandrel on time.

4. The release agent shall be wiped evenly.

5. Adjust the overall width of the surface glue. Make the overlap total width not exceed 5mm.

6. The extruded finish rolling tube must be cooled sufficiently (generally, the shutdown time is not less than 2h) before inserting the rod.

First, the wrapping speed of the water cloth is too fast when everyone makes the sandblasting pipe, and the uneven bearing force will cause the sandblasting pipe to shake. Secondly, the transformer core diameter is small, air pressure and wind are too much. The second reason may be that the inner rubber layer is loose from the transformer core. This kind of situation may also be caused by the excessive support force of the water cloth. At this moment, everyone must properly control the speed of the water wrapping cloth, and the water wrapping cloth must be applied with the same strength.

The main use of this product is reflected in Sandblasting pipe It is a kind of soft rubber hose used to transport (positive pressure standard) all kinds of liquid viscous fluid mechanics and powder solid raw materials.