Sandblasting hose Strict requirements for processing and production

Sand blasting hose is also a common kind of hose for transportation. The following section will introduce the specific precautions for sand blasting hose processing and production:

1. Wear protective equipment before processing sand blasting hose, and do not work with bare arms.

2. The air receiver, pressure gauge and safety valve shall be calibrated regularly. Dust is discharged from the air tank once every two weeks, and the filter in the sand tank is checked once a month.

3. Check whether the ventilation pipe and sandblasting machine door are sealed. The ventilation and dust removal equipment must be started five minutes before work. When the ventilation and dust removal equipment fails, the sandblasting machine is forbidden to work.

4. The compressed air valve shall be opened slowly, and the air pressure shall not exceed 0.8MPa.

5. The sand blasting particle size of the sand blasting hose shall be consistent with the work requirements, generally between No. 10 and No. 20, and the sand shall be kept dry.

6. When the sandblasting machine is working, irrelevant personnel are prohibited from approaching. When cleaning and adjusting the running parts, the machine should be stopped.

7. Do not use compressed air to blow dust on your body or make jokes.

8. After the work is completed, the ventilation and dust removal equipment should continue to run for five minutes and then be closed to discharge indoor dust and keep the site clean.

Copyright notice: The article is from the network, only for learning and exchange, not for any commercial use, and the copyright belongs to the original author. If you have any questions, please contact us in time, and we will delete it as soon as possible.