Hose pump Extruded tube Replacement and adjustment of!

(1) When replacing the hose, loosen the bolt of the pipe clamp at both ends, remove the pipe clamp, loosen the bolt of the lifting ring at one end, pull the short pipe at one end out of the hose, jog the motor to push the hose out of the pump, insert the new hose between the pump housing and the pressure roller from the end of the removed short pipe, jog the motor, install the hose, fix the lifting ring, and install the pipe clamp, So far, the replacement task is completed.

(2) Note: When installing the hose, be sure to stick the hose tightly to the pump housing and put it into normal operation after confirmation.

(3) When the hose is used for about 200 hours, it can be rotated by 90 °. For a single hose pump, in addition to the rotation direction, it can also be rotated forward and backward Direction of rotation.

Copyright notice: The article is from the network, only for learning and exchange, not for any commercial use, and the copyright belongs to the original author. If you have any questions, please contact us in time, and we will delete it as soon as possible.