Flow type Peristaltic pump Extruded tube It is also called rubber extrusion pipe, extrusion pipe and peripheral extrusion pipe. High tensile silica gel is used as the raw material, and the production process and monitoring are relatively strict, which must be strictly tested and inspected before leaving the factory. Silicone hose is very different from ordinary silicone hose, mainly in silicone purity, tear resistance, tensile performance, springback performance, pump pipe size tolerance control, etc.

Extruded rubber hose for peristaltic pump is specially designed for hose pump to meet sufficient shape recovery. Extruded hose is mainly divided into high elastic outer layer, compression staggered combination middle layer and strong and tough lubrication inner layer. It has excellent materials, fine processing and special technology. Different materials can be adjusted to produce pipes for different applications.

Working principle: the rubber hose is flattened and loosened by the shaft wheel of the pump, so that the rubber hose can recover to its original state through its own elasticity, so that a vacuum is generated in the pipe to suck the mortar in the tank, and then the mortar is pushed forward under the extrusion of the shaft wheel. It is suitable for extruding mortar pump and cement mortar. The pressure bearing deformation of the pipe body is small, the extrusion resistance is good, the rubber layer has good elasticity, and the bursting pressure of the rubber pipe is not less than three times of the working pressure.

Features: uniform toughness makes the stress more uniform; Special anti-aging formula; Strong shape recovery makes the suction stronger; Internal compressive strength up to 3Mpa; Finish machining size to extend service time; It is suitable for conveying viscous fibers and particles.

Due to the structural resolution, the power of general sewage pump and mud pump is very low, which is easy to be worn, wound and stuck by sand fiber, causing damage to the impeller and pump body. Its maintenance costs are also high. RG series mining hose pump is a non leakage, corrosion resistant, simple structure of the positive displacement pump. There is only one vulnerable part, which does not need to add water before opening. It is convenient to use, and can transport liquid mixed with solid particles. The transmission power is 50% higher than that of the impeller pump, and the maintenance is simple and convenient.

Copyright notice: The article is from the network, only for learning and exchange, not for any commercial use, and the copyright belongs to the original author. If you have any questions, please contact us in time, and we will delete it as soon as possible.