Recently, many partners have searched for relevant content of sandblasting room on the Internet, Sandblasting pipe The manufacturer's editor has sorted out some content for you, and hopes it can help you.

1. Sand blasting pipeline, air supply

Check whether the sand blasting plastic hose is damaged and replace it immediately. Check whether the connection is firm. If there is water leakage, it should be removed immediately. Check the destruction, damage and connection of the bronchus to ensure that each connector is sealed reliably. If damaged, it should be replaced immediately.

2. Honeycomb wood floor

Check whether there are large residues in the honeycomb wood floor at work and after work every day, and if so, eliminate them.

3. Artificial respirator

Before going to work, check whether the safety protection laminated glass of the respirator is damaged or endangers the actual operation of production and processing. If damaged, please replace it immediately. Ensure life safety; Check the air filter screen and pneumatic valve of the breathing mask to ensure that all the air paths are normal.

Because the laminated glass of protective clothing is easy to break, it should be handled with care during sand blasting, without random touching, and should be placed stably when not needed.

4. Spray gun and nozzle

Check the damage of the inspection gun and nozzle. If it is seriously damaged or the efficiency of the whole process of sand blasting is significantly reduced, remove and replace it immediately.

Because the nozzle, laminated glass of protective clothing, power switch of paint spray gun and other positions are easy to break, sand blasting should be handled gently without shaking and touching, and it is not necessary to keep them stable at all times.

5. Sand regulating valve sand regulating rod

Check whether the adjusting rod is damaged and replace it in advance.

6. Indoor safety protection rubber cover

Check whether the vulcanized rubber in the room is damaged and replaced according to the condition.

7. Door protection switch, gun power switch

Check whether the hydraulic gate operation protection switch and the spray gun power switch are smart and reasonable. If the posture is unsuccessful, immediately carry out maintenance.

8. Tightness

Check the hydraulic seal, especially the sealing strip of engine room door. If it is found to be invalid, it should be replaced immediately.

9. Electrical control system

Check whether the actual operation control button of each machine is normal. If there is any abnormality, it should be repaired immediately.

10. Lighting fixtures

Check the application of safety protection laminated glass, electronic ballast and light bulb of lighting fixtures.

11. Filter dust box

Remove the dust in the filter element dust box and separation equipment dust box before working.

If you still need to know something, Sandblasting pipe The manufacturer's editor suggests that you search some official websites online, where there will be a lot of professional knowledge.